Product Introduction
      InRouter600 Series 3G wireless routers work on 3G wireless network to establish secured and high-speed wireless connection between remote equipments and central stations. No matter where your equipments locate, you can have them connected to internet easily via the HSDPA/3G/EDGE/GPRS networks with global coverage.
        Nowadays the industrial Ethernet has developed rapidly. Different from the traditional routers which are mainly used for networking between headquarter and branch offices, InRouter600 series 3G wireless routers cater the needs of industrial users, can be well utilized for networking and management of remote industrial equipments. Either to monitor the running status of remote equipments or to prepare a backup link for the wired equipment data link, InRouter600 could be a good choice. The industry grade design, incl. Wide Temperature Range, Industrial Power Terminal, Guide-Rail installation, and MODBUS support, exceeded general network products to meet the technical requirements of industrial equipment networking.
       InRouter600 has an integrated 4-port switcher to link a LAN to internet, therefore can largely reduce your cost of informatization construction for equipment management. It also has the VPN function to establish virtual private network for connected equipments, so that equipment data is transmitted in IPSec channel to be secured from visiting or changing. This has exhibited high level security in a lot of bank ATM networking applications.
       InRouter600 provides upgradable wireless network platform. With the embedded HSDPA module, or an external USB wireless modem certified by your local operator, you can immediately enjoy the convenience of 3G network to link your equipments into the high-speed internet. (Please contact: usbdevice@inhandnetwork.com to make sure your wireless modem is supported by InRouter600.)
System Applications
Ordinary Router Mode:
        InRouter 600 routers can be used as ordinary routers for users to access Internet easily.
Operator Private Network Mode:
        InRouter 600 routers support operators’ Private Network services, which is an application widely employed by ATMs of banks, POS machines, and other industrial applications that require private networks for communication links. It provides the advantages of high data security, complete insulation of data channel from Internet and other networks; however as it requires special services offered by local cellular operators, it is not used in construction of networks across regions and countries. A typical network structure of this mode is as the following:
VPN Applications:
       InRouter600 has VPN（Virtual Private Network）functions to support multiple LANs communicate with each other through VPN. This can be applied in many situations which require high data security, such as, remote monitor of industrial equipments, networking between headquarter and branch offices, and networking of self-service terminals. It ensures high data security, can also meet the need of equipment networking across regions and countries. A typical VPN network structure is as the following: 
 
 
Key Features:
4 Integrated 10/100Mbps Adaptive High-speed Ethernet Switching Ports
3G Wireless Network high-speed access through embedded HSDPA module or external USB 3G modem
VPN (Virtual Private Network): support VPN services based on standard IPSec, enable data encapsulation, encryption and certification options incl. IP ESP, DES, 3DES, AES, MD5, and SHA-1 SPI and DoS firewall features: SPI checks the head content of all incoming data packets to judge which data packets can pass, the filter can be set according to MAC address or IP address
NAT (Network Address Translation) and PAT (Port Address Translation), to hide internal IP address and expand address space
Virtual server and DMZ support
Local and remote firmware upgrade, with firmware backup and failover
Multiple layer connection check: always online, on-demand dialing
DTU support
Remote management through OVDP management platform
Industry grade design, incl. Industrial Power Terminal, Guide-Rail installation, 9-24VDC power supply, Wide Temperature Range, and support of Industry Field

Bus Protocol MODBUS, etc.
Product Specifications:
Product Model:
Standard: IEEE
Ports:   -- WAN Port: RJ45
-- LAN Port: 4 x RJ45
-- Serial Port: RJ45
-- USB: Type-A
-- Antenna port: Standard SMA Female, 50Ω
Buttons: Reset button
SIM/UIM Card Socket: Flip
LED: Power, Status, Warning, Error
Wideband support:      --ADSL (PPPoE), DHCP Client, Static IP
                                -- HSDPA
Settings/Configurations:
WEB UI
TELNET
Serial port: Baud rate (2400 to 230400 bit/s)
SSH
Network Features:
Routing Protocol: Static Routing
Internet Gateway: NAT
DHCP Service
DNS Relay
Dynamic DNS
Virtual IP Mapping
Packet Inspection: SPI
DMZ
Port Mapping
MAC Address Bundling
VRRP
Security:
Access Control: flexible access control of TCP, UDP, and ICMP packets
Firewall: Multicast block, PING packet block, DoS attack defense, various firewall policies
VPN Support:
VPN Protocol: IPSec
Number of Tunnels: 4
Data Encryption Method: DES, 3DES, AES
Certification Method: Pre-shared Keys, Digital Certificates
IPSec NATT
VPN Connection Mode: Client, Server
Management:
Optional remote management through OVDP management platform
Event Log: generate Running Log for each modules, remote logging supported
WEB Firmware Upgrade: automatically backup firmware before upgrading and failover in case of upgrade failure
Diagnostic: download diagnostic log to locate malfunctions immediately
3G Wireless Network:
Network: HSDPA/UMTS/EDGE/GPRS  
Transceiver Frequency: GSM/EDGE: 850/900/1800/1900MHz UMTS/HSDPA: 850/1900/2100MHz
EDGE multi-slot class 10
GPRS multi-slot class 12
Data Communication Uplink/Downlink Rate:
HSDPA ：max. 3.6Mbps(DL), max. 384Kbps(UL)
WCDMA：max. 384Kbps(DL), max. 384Kbps(UL)
EDGE：max. 237Kbps(DL), max. 118Kbps(UL)
GPRS：max. 85.6Kbps(DL), max. 42.8Kbps(UL)
Antenna Port: Standard SMA Female, 50Ω
Work Environment:
Dimensions: 130mmⅹ50mmⅹ185mm
Weight: 680g
Power Supply: 9-26VDC, support in-cabinet 24VDC power supply, industrial power terminal, 12VDC power supply adapter (0-60℃) of standard configuration, and

wide-temperature power supply adapter is optional
Work Temperature: 0℃ to +65℃(Commercial Grade), -20℃ to +65℃(Industry Grade)
Work Humidity: 95%(Non-condensing)
Storage Temperature: 0℃ to +70℃(Commercial Grade), -40℃ to +85℃(Industry Grade)
Storage Humidity: 95%(Non-condensing)
Ethernet Isolation：1500VAC min per IEEE802.3/ANSI X3.263
Serial Port Protection（ESD）：+15KV Air 6AP +8 KV contact discharge per IEC 1000-4-2
Installation Manner: DIN-Rail(35mm) installation
Industrial Automation Features:
Standard Guide-Rail installation
3-Pin industrial Power Supply Terminals
Industry level wide temperature range: -40℃ to +85℃
Selectable various models supporting following industry communication protocols: MODBUS RTU，MODBUS TCP
Certifications:
Safety: EN60950
EMC: EN55024
EN55022，Class A
Mobility: R&TTE, EN301511
Information for Ordering:
When confirming your order information with our sales representatives, please refer to below naming rules of our products: